To Next PageTo Next Page
Need help?Do you have a question about the Dometic DM Series and is the answer not in the manual?
General| Brand | Dometic |
|---|---|
| Model | DM Series |
| Category | Refrigerator |
| Language | English |
Identifies the safety alert symbol used to warn of potential physical injury hazards.
Explains signal words (WARNING, CAUTION, NOTICE) indicating hazard seriousness.
Emphasizes reading and following all safety information and instructions before installation.
Lists critical safety warnings, including installation by qualified technician and electrical shock hazard.
Lists optional accessories like the Innovator Refrigerator Ventilation System and Z-bracket.
Outlines the intended use in recreational vehicles and Dometic's liability limitations.
Provides overall and rough-in dimensions for refrigerator enclosures for various models.
Details the dimensions for upper and lower door panels for different refrigerator models.
Specifies panel dimensions for the RM1350 model, including detailed diagrams.
Details required clearances around the refrigerator and minimum ventilation heights for proper operation.
Lists approved vent applications and part numbers for different installation types.
Provides a cross-reference for vent part numbers and available color codes.
Step-by-step guide for safely removing an old refrigerator from its enclosure.
Instructions for inspecting and assembling the enclosure to ensure proper installation.
Guides on selecting the correct vent application (Roof, Side, Island, Corner, Offset) based on installation needs.
Provides instructions and diagrams for installing various vent types, emphasizing LP gas safety.
Details the installation process for the plastic roof vent, including securing and sealing steps.
Instructions for installing various side vents (plastic and metal), including securing and door locking.
Information on installing fan systems, Z-brackets, and related components for vent applications.
Explains how to manage recess depth and install baffles for different vent applications.
Describes specific installation procedures for corner and offset vent configurations.
Guidelines for correctly placing insulation around the refrigerator, avoiding contact with the cooling unit.
Instructions for connecting the water supply to refrigerators equipped with ice makers or dispensers.
Steps for placing the refrigerator into the enclosure and ensuring a complete seal.
Details on how to secure the refrigerator to the enclosure using screws and plugs for different models.
Instructions for attaching the front strip to the hinge plate as part of the installation process.
Guides for routing and installing the drain water hose, emphasizing fire safety precautions.
Step-by-step instructions for safely connecting the gas supply, including leak detection.
Covers 120 VAC, 12 VDC, and Alternator (D+) connections, including wire length guidelines.
Detailed steps for removing doors, swapping hinges, and re-attaching doors for reversed swing.
Instructions for fitting and securing the decorative door panels to the refrigerator doors.
Steps for removing an existing door panel and installing a new one, including handle and strip replacement.
Safety warnings about suffocation and entrapment hazards during disposal and refrigerant handling.
Guidance on recycling the refrigerator responsibly and complying with local disposal regulations.
