To Next Page

To Previous Page

Frigo DC Accessories

6 Accessories

7 Installing the transport refrigeration

system

7.1 Prerequisites for the installation

7.2 Installation instructions

Description Ref. no.

LED display for stationary cooling A460881

Stationary cooling with Schuko plug 9600010806

Condensation drainage for Frigo DC 3500 evaporator 4443000383

Stationary cooling with CEE plug 9600024843

NOTE

For installing the transport refrigeration system, the following conditions must

be met in the vehicle:

• Battery capacity: at least 90 Ah

• Generator: at least 125 A

• Thermal insulation: at least k-value = 0.4 W/(m

DANGER! Danger of fatal electric shock!

Before starting any installation work, disconnect the battery and make sure that

no voltage can be transferred to the electrical components. Danger of injury

due to live electrical components. When connecting the electrical compo-

nents, there is a risk of electric shock.

WARNING!

Improper interventions or fittings on and in the vehicle’s electrical system and

electronics system can lead to impairment of the functions. This can lead to the

failure of vehicle-mounted components or vehicle safety equipment and as a

result to accidents involving personal injury or damage to the vehicle.

Frigo_DC-I-West.book Seite 25 Mittwoch, 24. Juni 2020 11:27 11

Dometic Frigo Series User Manual

Questions and Answers: