Using the device MK140
10
7 Using the device
If an automatic fuse (fig. 1 1 or 2, page 3) has tripped, switch it back on
again.
If the circuit breaker (fig. 1 3, page 3) has tripped, switch it back on again
by pressing it.
Only replace a plug-in fuse which has blown (fig. 1 4, page 3) with a plug-
in fuse for vehicles (15 A) of equivalent quality.
Please consult your service partner or a qualified specialist if the function
cannot be restored by switching on the fuses or replacing the vehicle's plug-
in fuse.
8 Maintaining and cleaning the device
A
➤ Clean the device using a damp cloth as required.
NOTICE!
Do not use any sharp or hard objects for cleaning since they may
damage the device.
MK140-MB-16s.book Seite 10 Freitag, 20. Dezember 2019 12:57 12
To Next Page
Loading...