Safety instructions RF60, RF62
16
• Disconnect the device from the power supply
– before each cleaning and maintenance
– after every use
Health hazard
• Please check if the cooling capacity of the device is suitable for storing
the food you wish to cool.
• Only use the device where there is good ventilation.
• Only operate the device from a single energy source.
• Food may only be stored in its original packaging or in suitable
containers.
• Opening the device for long periods can cause significant increase of
the temperature in the compartments of the device.
• Clean regularly surfaces that can come in contact with food and
accessible drainage systems.
• Store raw meat and fish in suitable containers in the device, so that it is
not in contact with or can drip onto other food.
• If the device is exposed to a room temperature of below +10 °C for an
extended period of time, an uniform temperature cannot be guaran-
teed in the freezer compartment. This can lead to an increase of the
freezer compartment temperature and the goods stored in it may
defrost.
• If the device is left empty for long periods:
– Switch off the device.
– Defrost the device.
– Clean and dry the device.
– Leave the door open to prevent mold developing within the
device.
!
CAUTION! Failure to obey these cautions could result in minor or
moderate injury.
injury hazard
• Close and lock the device door before beginning a journey.
• The cooling aggregate at the back of the device becomes very hot
during operation. Protect yourself from coming into contact with hot
parts when removing ventilation grills.
A
NOTICE! Damage hazard
• Check that the voltage specification on the type plate corresponds to
that of the energy supply.
To Next Page
Loading...
