7
Electrical operation
1. 12V - operation (DC)
2. Mains power
5.2.2
2. Use rotary switch (B) to regulate the
temperature in the main refrige-
rator compartment.
1. Set energy selector switch
(A) to 12V .
Operating display “C”, 12V
lights “green”.
Appliance is in function.
2. Use rotary switch (B) to regulate the
temperature in the main refrige-
rator compartment.
1. Set energy selector switch
(A) to 120V .
Operating display “C”, 120V
lights “green”.
Appliance is in function.
If the operating display fails to light up the device is not in operation.
(For troubleshooting see 5.13)
If the operating display fails to light up the device is not in operation.
(For troubleshooting see 5.13)
CAUTION
CAUTION
A
C
B
The refrigerator should only be used while the motor is running,
otherwise the on-board-battery would be discharged within a few
hours!
A
C
B
This option should only be selected where the supply voltage
of the connection for power supply corresponds to the value
specified on the data plate. Any difference in values may
result in damage the appliance.
To Next Page
Loading...
Need help?
General
