6
Using the refrigerator
The cooling unit is silent in operation.
When the appliance is first put into operation, there may be a mild odour
which will disappear after a few hours.
Ensure the living area is well ventilated.
The refrigerator will take several hours to reach its operating temperature
in the cooling compartment
The freezer compartment should be cold about one hour after switching on
the refrigerator.
Controls
Note:
The refrigerator is equipped to operate on mains power, DC or liquid gas (propane/
butane). The desired power option is selected by means of energy selector switch (A).
Energy selector switch (A) has four settings: AC mains power, DC (12V),
Gas (liquid gas), OFF.
Appliances with automatic energy selection have the additional setting “AUTO” .
5.2
5.2.1
A. Manual energy selection
MES
( RM 76x1 L, RM 78x1 L)
B. Automatic and manual energy selection
AES
(RM 76x5 L, RM 78x5 L)
A = energy selection switch E = switch for frame heating with display LED
B = gas/electric thermostat AC/DC
C = operating displays (3 LEDs)
AC mains power
12V DC
Gas
A = energy selection switch
B = gas/electric thermostat AC/DC
C = operating displays (4 LEDs)
D = temperature setting display
E = switch for frame heating with display LED
F = dimmer for LED-displays
(only accessable when door opens)
OFF
Automatic energy selection
A
B
C
E
B
D
A
F
E
C
To Next Page
Loading...
Need help?
General
