CERTIFIED INSTALLATION
#
Certified installations require one roof vent and one lower
side
vent or as optional one upper vent and one lower side vent
The two alternatives are provided for by using the drfferent kits
listed
in the
Appendix.
For further information contact your dealer or distributor.
METHODS OF INSTALLATION
The methods of installation are shown in figures 10 a and 10 b.
It is essential that all
maximum
or
minimum
dimensions are
ventilation
strictly maintained as the performance of
the
refrigerator is
height
dependent on an adequate flow of air over the rear of the
refrigerator.
VENTILATION HEIGHTS
Refrigerator
model
Minimum ventilation heights in inches and mm
Installation with
Installation with roof
upper and lower
vent and lower side
I
/-
l
side vent
1
vent
Fig.
10 a
I
I
I
1
I
RM
23Ol,,,;j
37
940
RM
2401,;
_
34
864
I
r
RM2501
ft.
42
_
mm
1067
RM
2601,;
56
_
1422
+
RM2801,;
-
62
1575
Duct cross
section
Ventilation
height
area 5" x 18"
a-
Condenser
Fig.
10 b
To Next Page
Loading...
Need help?
General
