RMD10.5(X)(T)(S) Troubleshooting
33
WARNING type fault messages
All faults of the WARNING type are reset automatically once the fault has been
rectified.
ERROR type fault messages
All faults of the ERROR type must be reset manually:
➤ RMD10.5T, RMD10.5XT: Press the control knob for 2 seconds.
➤ RMD10.5, RMD10.5X, RMD10.5S, RMD10.5XS: Press for 2 seconds.
✔ A beep sounds.
✔ The error has been reset.
RMD10.5T,
RMD10.5XT
RMD10.5,
RMD10.5X,
RMD10.5S,
RMD10.5XS:
Fault Solution
W01
Defective temperature
sensor in the refrigerator
compartment
Contact an authorized customer
service.
W05 AC power not connected or
AC voltage < 190 V
Connect the refrigerator to AC or
select a different energy type, e.g.
gas or DC.
W06 DC power not connected Connect the refrigerator to DC or
select a different energy type, e.g.
gas or AC.
W11 DC overvoltage (> 16 V) Reduce the DC supply voltage.
Tank stop mode: Gas opera-
tion is blocked for
15 minutes.
Wait 15 minutes or switch to another
operating mode.
W10
+ beep
Beep The door is opened for more
than 2 minutes.
Close the door.
DometicRMD10_OPM_4445103406_EMEA(18)_20xx-xx-xx.book Seite 33 Freitag, 4. Juni 2021 7:14 07
To Next Page
Loading...
Need help?
General
