Need help?Do you have a question about the Dometic RMDT 8501 and is the answer not in the manual?
General| Brand | Dometic |
|---|---|
| Model | RMDT 8501 |
| Category | Refrigerator |
| Language | English |
Provides guidance on appliance installation and adherence to country regulations, including gas systems.
Advises users to read instructions carefully for safe installation and proper operation of the refrigerator.
States that information, texts, and illustrations are protected by copyright and industrial property rights.
Explains warning symbols (DANGER, WARNING, CAUTION) and their associated hazard levels.
Details warranty arrangements according to EC Directive and conditions for the country of use.
Outlines Dometic's liability limitations for damage caused by non-compliance or improper use.
Provides the Declaration of Conformity for the appliance, listing relevant directives and standards.
Specifies the refrigerator is for recreation vehicles and outlines its intended use for food storage and cooking.
Emphasizes the user's need to understand safe handling and follow operating instructions for the refrigerator.
Warns that work on gas, exhaust, or electrical systems must be done by authorized personnel only.
Stresses the importance of matching the operating pressure to the appliance's rating plate and gas cylinder regulator.
Explains how to identify the refrigerator model using the example RMD T 8501 and its components.
Describes the location and importance of the rating plate for model details, product number, and serial number.
Presents technical specifications including dimensions, capacity, rating, consumption, and weight for various models.
Provides general guidelines for installing the unit, emphasizing compliance with regulations and proper positioning.
Details side installation considerations, including clearance from doors and ventilation grille recommendations.
Discourages rear installation due to potential ventilation issues and loss of cooling performance.
Explains the requirement for draught-proof installation and recommends flexible sealing materials.
Specifies requirements for the installation recess, including draught-proofing, dimensions, and leveling.
Provides detailed dimensions for installation recesses for different refrigerator models.
Explains the importance of correct ventilation for proper operation and heat dissipation.
Details ventilation through grilles for fresh air intake and heat/exhaust extraction.
Covers ventilation for the oven, including air supply and exhaust ducting into the vehicle's interior.
Specifies requirements for ventilation openings for models without a flue to ensure adequate air supply.
Describes the use of special cowls for mounting on the roof for ventilation and exhaust gas ducting.
Provides minimum ventilation height requirements for the oven and refrigerator components.
Details the process of installing the ventilation system, including cutting holes and mounting components.
Instructions for installing the LS300 ventilation grilles, including dimensions and sealing.
Guides the installation of the Truma roof cowl, including cutting, fixing the flue pipe, and clearances.
Details the installation of a ventilation grill above the oven for models with interior ventilation.
Explains how to set up the exhaust duct system for complete extraction of combustion products to the outside.
Describes how to secure the refrigerator using provided plastic sleeves and screws, warning about proper insertion.
Provides instructions for inserting decor panels onto the refrigerator door, for both framed and frameless types.
Details the requirements for gas connection, emphasizing qualified personnel, regulations, and pressure regulators.
Lists gas categories, required pressures, and oven burner features, including nozzle types.
Outlines safety warnings and requirements for electrical installation, stressing qualified personnel.
Specifies requirements for mains connection, including grounded sockets and accessible outlets.
Explains the 12V connection, including wiring for heating elements and battery/generator connection.
Details cable connections for MES and AES models, including permanent 12V DC supply and fuse protection.
Describes D+ and S+ signal connections for AES models, relating to automatic energy selection and solar power.
Presents circuit diagrams for AC and DC power supply, including connections for heating elements and electronics.
Details the installation and wiring for optional ventilators for specific RMDT models.
To Next Page
