RM(x)8xx6 Cleaning and maintenance
35
7.15 Replacing the door panel
A
Removing the panel plate with frame
➤ Proceed as shown in fig. e, page 9.
Installing the panel plate with frame
➤ Proceed as shown in fig. f, page 10.
Removing the panel plate without frame
➤ Proceed as shown in fig. g, page 11.
Installing the panel plate without frame
➤ Proceed as shown in fig. h, page 12 and fig. i, page 13.
8 Cleaning and maintenance
!
A
NOTICE! Risk of damage!
The door panel must not be replaced when the refrigerator is upright.
WARNING!
• Always disconnect the refrigerator from the energy supply before
you clean and service it.
• Working on gas and electrical installations may only be performed by
qualified technicians.
NOTICE!
• Do not use abrasive cleaning agents or hard objects during cleaning,
as these can damage the refrigerator.
• Never use hard or sharp tools to remove ice or to free objects frozen
onto the device.
• Do not use any mechanical tools or any other tools to speed up the
defrosting process.
• The internal parts of the refrigerator (vegetable compartment and
shelves) are not suitable for dishwashers. They can be damaged if
they are cleaned in a dishwasher.
RM(X)8xx6-O-EN-DE.book Seite 35 Dienstag, 12. Juni 2018 9:01 09
To Next Page
Loading...
