Using the toilet SaneoB, SaneoC
20
On the Dometic website (see back page) you can find further information about
sanitary accessories.
6.2 Preparing the cassette tank
Removing the cassette tank
Proceed as follows (fig. 3, page 2):
➤ Open the service door.
➤ Push the catch upward to unlock the cassette tank.
➤ Pull the cassette tank out of the cassette housing. When pulling out the tank,
resistance has to be overcome.
I
Adding sanitary additive
➤ Position the cassette tank upright.
➤ Rotate the drain pipe approx. 90° upward (fig. 4, page 3).
I
➤ Twist off the cap (fig. 5, page 3).
➤ Put the cap onto the cassette (fig. 5, page 3).
➤ Add sanitary additive into the cassette tank via the drain pipe (fig. 6, page 3).
Observe the instructions for the sanitary additive.
Pushing the cassette tank into the cassette housing
A
➤ Slide the cassette tank all the way into the cassette housing.
NOTE
When the cassette is removed, the slide handle on the toilet housing is
locked. The cassette can only be inserted when the slider is closed.
Do not pull on the slider handle when the cassette has been removed.
NOTE
Avoid turning the drain pipe more than 90°, as it otherwise can come off
(fig. 4, page 3).
NOTICE!
Ensure that the cassette tank can be pushed into the cassette housing
easily. Make sure that the cassette tank does not bump into other
objects or components.
Saneo-B-Saneo-C--O-5s.book Seite 20 Mittwoch, 7. März 2018 9:45 09
To Next Page
Loading...
