Need help?Do you have a question about the Dometic SeasStar Power Assist and is the answer not in the manual?
Explains symbols used in the manual for hazard warnings and notes.
Provides guidelines for safe use of the steering system before, during, and after operation.
Offers crucial safety advice and precautions specifically for those installing the system.
Details the safety labels found on the product and their meaning.
Outlines essential checks to perform before operating the boat with the steering system.
Specifies regular inspection intervals and conditions for system maintenance.
Advises on essential preparations and checks before commencing system installation.
Details compatibility requirements between helm, hoses, and cylinders for the P/A system.
Lists the necessary tools for completing the installation process.
Provides a step-by-step summary of the overall installation process for the system.
Guides on how to install the compensating line fitting to the helm.
Instructions on how to mount and install the power assist pump unit.
Explains how to replace straight fittings with 90° fittings for pump installation.
Outlines crucial DOs and DON'Ts for plumbing the hydraulic steering system.
Details cylinder part numbers and diagrams for outboard front mount and I/O configurations.
Illustrates the hose connections for a single cylinder installation.
Provides diagrams and information for dual cylinder configurations, parallel and series.
Presents diagrams and information for triple cylinder configurations, parallel and series.
Explains hose connections for side mount and splashwell mount cylinders.
Details hose connections for inboard and sterndrive cylinder installations.
Guides on connecting an autopilot pump to the SeaStar steering system.
Covers wiring requirements, power source connections, and safety for the P/A unit.
Step-by-step guide for purging the system using the Power Purge tool.
Instructions for filling and purging the hydraulic system manually.
Specifies the type and quantity of hydraulic fluid needed for the system.
Details the procedures for filling and purging the system for different configurations.
Lists checks to perform after filling and purging to ensure proper system function.
Method to verify that all air has been removed from the steering system.
How to check and ensure the correct hydraulic fluid level in the helm.
Procedure to test the system pressure and check for leaks.
Steps to check for any physical interference with steering components.
Explains the meaning of different LED light patterns and their solutions.
Lists available fitting kits for the system.
Describes the kit for controlling P/A ignition with multiple engines.
Lists available fuse kits for the power harness.
Details the Power Purge JR tool for bleeding the system.
Provides a template for floor mounting the power assist unit.
Provides a template for wall mounting the power assist unit.
Outlines the terms and conditions of the 2-year limited product warranty.
Provides contact information for warranty claims and return procedures.
Lists contact details for technical assistance and support.
Directs users to the website for finding authorized service centers and distributors.
General| Brand | Dometic |
|---|---|
| Model | SeasStar Power Assist |
| Category | Industrial Equipment |
| Language | English |
To Next Page
