7
3. Adjust the tent to the roof’s centre, ensu-
ring the rear door can be opened/closed.
4. Slide the M8X50 hexagon bolt into the
rails from both sides, ensuring you have
positioned 8 in total (see Picture 1). Repla-
ce the plastic covers of your roof racks (see
Picture 2).
5. Use the plastic nut, flat, and split washer
to fix the M8X50 hexagon blot and
U-shaped bracket in place to all 4 corners
(see Picture 3).
Picture 1 Picture 2
Picture 3 Picture 4
To Next Page
Loading...
