Domo DO712K - Before the First Use

17
DO712K
www.domo-elektro.be
EN
PARTS
1. Cover
2. Reservoir with grinding blade
3. Base
BEFORE THE FIRST USE
· Remove all packaging materials and any promotional stickers before using for the rst time.
· Clean the coee grinder before use. See ‘Cleaning and maintenance’ section.
USE
1. Place the device on a rm, dry, even surface.
2. Remove the reservoir cover. Place the desired amount of beans in the reservoir. Make sure not to
exceed the ‘max.’ indication (± 70 g). Replace the cover, making sure that the arrow on the cover
corresponds with the ‘O’ mark on the base.
3. Plug the power cord into a socket.
4. To operate the blade, turn the cover clockwise so that the arrow on the cover corresponds with the
‘I’ indication on the base. Hold the cover down to keep grinding.
Attention: do not grind for longer than 1 minute at a time.
5. To stop grinding, let go of the cover. The appliance stops automatically and the cover returns to the
starting position.
6. Wait for the blade to come to a complete standstill before removing the cover.
Once the desired grinding result has been achieved, remove the cover and unplug the power cord
from the socket.
7. You can remove the reservoir with the ground coee from the base. Turn the reservoir counter-
clockwise and lift it out of the base.
Be careful: the blades are very sharp.
TIPS
· The longer or more often you let the machine grind, the ner the grinding result. Coarsely ground
coee can be used for percolators, medium coarseness is suitable for coee machines, and nely
ground coee is best used for espresso machines.
· Adjust the duration of the grinding or the number of times according to your personal preference and
the type of bean you use.
· For the most delicious coee, it is best to grind only the amount of coee you wish to use. That’s how
you get freshly ground beans every time.
1
2
3