• Place the empty bowl on the bowl holder on a at surface.
• Make sure that the bowl is thoroughly clean.
• Press once on the “0” button.
• Press for 6 seconds on the “0” button until “CAL” appears and ashes on and off
on the display. In the meantime the display will switch off for a moment. Do not
touch the appliance during calibration.
• The display will then show “0” again and you can start weighing.
SPECIFICATIONS
Maximum temperature: White bowl 90°C
Maximum weight
visible on the display: 5050 grams, 2500 ml, 10 cups, 90 oz.
Smallest unit volume and weight 1/8 cup, 1/8 oz, 1 ml; 1g, 1/8 oz
Battery: 2x AAA (1,5V)
23
To Next Page
Loading...
Need help?
General
