42
DO924DV
EN
· Avoid very moist places.
· Before connecting your refrigerator to the power supply, check that the voltage stated
on the rating label of your appliance corresponds to the voltage in your home. A dierent
voltage could damage the appliance.
· Make sure that the air can circulate around the refrigerator. Spacers have been provided
with the refrigerator to ensure that it cannot be pushed right up against the wall. Fasten
these to the back of the refrigerator.
· For uneven surfaces, front feet can be aligned.
· Install the handle.
· Allow the appliance to stand for 2 hours before turning it on. This allows the cooling agent
to settle.
· After installation, leave the freezer for 12 hours before turning it on. This way the
refrigerant can settle.
DOOR CONVERSION
The freezer has a reversible door. If you need to hinge your door on the opposite side it is
recommended that you call your local authorised service agent to make this conversion or ask
To Next Page
Loading...
Need help?
General
