EasyManuals Logo

Domo DO924DV User Manual

Domo DO924DV
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
DO924DV
www.domo-elektro.be
NL
6. Bevestig de schroeven, scharnierbeugel en het stelvoetje aan de andere kant van de
bodem.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet.
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
8. Put the top cover and fix it with 2 screws on the back.
Unscrew
Screw
8
Reverse Door
9. Fix the thermostat knob.
screw
7. Zet de deur voorzichtig op zijn plaats. Zorg dat de deur zowel horizontaal als verticaal
is uitgelijnd zodat de afdichtingen op alle zijden gesloten zijn voordat je het bovenste
scharnier volledig vastmaakt. Breng de scharnier terug en schroef vast op de bovenkant
van het apparaat.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet.
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
8. Put the top cover and fix it with 2 screws on the back.
Unscrew
Screw
8
Reverse Door
9. Fix the thermostat knob.
screw
8. Plaats het bovendeksel terug en maak het met behulp van de schroeven vast.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet.
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
8. Put the top cover and fix it with 2 screws on the back.
Unscrew
Screw
8
Reverse Door
9. Fix the thermostat knob.
screw
9. Plaats de temperatuurregelaar terug.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet.
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
8. Put the top cover and fix it with 2 screws on the back.
Unscrew
Screw
8
Reverse Door
9. Fix the thermostat knob.
screw

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Domo DO924DV and is the answer not in the manual?

Domo DO924DV Specifications

General IconGeneral
BrandDomo
ModelDO924DV
CategoryFreezer
LanguageEnglish

Related product manuals