EasyManua.ls Logo

Donaldson Torit Downflo Oval User Manual

Donaldson Torit Downflo Oval
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Downflo
®
Oval
DFO 2-8, 2-12, 2-16, 2-24, 2-36
3-10, 3-12, 3-18, 3-24, 3-36, 3-48, 3-60, 3-72,
4-16, 4-32, 4-48, 4-64, 4-80, 4-96, 4-112, and 4-128
Installation and Operation Manual
Installation, Operation, and Service Information
IOM 9343601 (ENG)
Revision 15
English
Master Language
This manual contains specific precautions related to worker safety. The hazard alert image denotes
safety related instructions and warnings in this manual. DO NOT operate or perform maintenance on this
collector until you have read and understood the instruction and warnings contained within this manual.
Question and Answer IconNeed help?

Do you have a question about the Donaldson Torit Downflo Oval and is the answer not in the manual?

Donaldson Torit Downflo Oval Specifications

General IconGeneral
Filter ShapeOval
ModelDownflo Oval
Filter TypeCartridge
Number of FiltersVaries by model (typically 1 - 4)
Filter MediaNanofiber or polyester
Filter EfficiencyUp to 99.99% on 0.5-micron particles
Filter CleaningPulse cleaning (reverse pulse)
Maximum VacuumVaries by model
Noise LevelVaries depending on model and operating conditions. Silencers and other noise reduction options are available.
Power RequirementsVaries by model
Dimensions (H x W x D)Varies by model
WeightVaries by model

Summary

Important Notes

Safety Definitions

Defines safety alert symbols, cautions, and notices for hazard identification.

Safety Communication

Combustible Dust Hazards

Discusses owner responsibilities regarding combustible dust and mitigation strategies.

Description

Purpose and Intended Use

Outlines the collector's intended applications and limitations, including specific dust types.

Rating and Specification Information

Operation

Inspection on Arrival

Installation Codes and Procedures

Installation

Foundations or Support Framing

Requirements for preparing and ensuring structural integrity of foundations or framing.

Collector Location

Guidance on selecting an optimal and safe location for the collector.

Site Selection

Considerations for choosing a suitable site, including environmental and load factors.

Hoisting Information

Procedures and precautions for safely lifting and handling the collector during installation.

Typical Installation

Standard Equipment

Field Assembly

Module Assembly

Deflector Plate, Yoke, Venturi, and Filter Installation

Hopper Installation

Provisional Anchor Bolt Recommendations

Leg Positioning

Compressed Air Installation

Electrical Wiring

Solid-State Timer Installation

Solenoid Connection

Timer and Solenoid Specifications

Preliminary Start-Up Check

Maintenance Information

Operational Checklist

Filter Removal and Installation

Filter Removal

Dust Disposal

Compressed Air Components

Optional Equipment

Fan Blower

Information and safety precautions for installing fan blowers.

Side Mount TBI or TRB Fan Blowers

Specifics for side-mounted TBI or TRB fan blowers.

TBI and TRB Style Damper and Silencer Support Bracket

55-Gallon Drum Pack

Rotary Valve and Transition

Magnehelic® Gauge

Photohelic® Gauge

Delta P Control

Delta P Plus Control

Plenum Silencer, TRB

Abrasion-Resistant Inlet Collar

Platforms and Ladders

Stationary Platform

Instructions for assembling and installing stationary platforms for collector access.

Extended Dirty-Air Plenum

Air Management Module

Cold Climate Kit

Explosion Vent

Sprinkler

Troubleshooting

Product Information

Service Notes

Donaldson Industrial Air Filtration Warranty

Related product manuals