Need help?Do you have a question about the Donaldson BOFA AD 1000 iQ and is the answer not in the manual?
Identifies external components of the extraction unit from the front.
Identifies external components of the extraction unit from the back.
Explains the data and icons shown on the unit's LCD screen.
Covers crucial safety information and hazard warning symbols used in the manual.
Details the various labels found on the unit and their meanings.
Instructions for safely unpacking and positioning the extraction unit.
Explains fume capture techniques and general advice for successful installation.
Details the procedure for connecting the unit to the mains power supply.
Describes optional features like remote stop/start and their configuration.
Configuration of signals to alert users about filter status or system failures.
Explains the safety interlock system for the unit's door and pre-filter.
Guides on powering up the unit and changing display settings like temperature and airflow units.
Instructions on how to set and adjust the required airflow rate for the system.
Describes the automatic airflow adjustment feature during initial setup.
Covers legal requirements and general user maintenance tasks like cleaning.
Step-by-step guide for replacing the pre filter and the combined filter.
Explains the unit's display capabilities, including fault icons and visual alarms.
Details specific alarms like over-temperature, VOC detection, and door status.
Instructions for using USB for duplicating settings and downloading operational data.
Describes logged data like airflow, filter blockage, and lists alarm codes.
Explains how the system indicates faults and lists common error codes.
Addresses potential problems with the unit's motor and internal power supply.
Information on pre/combined filters, their disposal, and re-ordering.
Guidance on using the data logging function and recording filter changes.
Provides technical dimensions, filter specifications, and motor type.
Lists the recommended operating temperature and humidity limits for the unit.
Lists contact details for BOFA headquarters, German office, and Americas office.
Outlines the recommended schedules for daily, weekly, monthly, and yearly inspections.
Details the steps and requirements for performing daily and weekly system checks.
Describes the process for monthly checks and annual thorough inspection and testing.
General| iQ Operating System | Yes |
|---|---|
| Voltage | 230 V |
| Power Consumption | 1.1 kW |
| HEPA filter efficiency | 99.997% at 0.3 microns |
| Filter Type | HEPA |
| Gas filter | Advanced Carbon Filter |
| Noise Level | 65 dB(A) |
| Filtration Efficiency | 99.997% at 0.3 microns |
To Next Page
