Donaldson UDM 300 User Manual

Betriebsanleitung
DE
UDM 300
Stationäre Feuchtemessgeräte zur
Messung des Drucktaupunktes und Atmosphären-Taupunktes
in unterschiedlichsten Anwendungen:
- Druckluftanlagen (Kälte/Adsorptionstrockner)
- Granulattrockner
- medizinische Gase
- nicht korrosive Gase, z.B. Stickstoff
- usw.

Donaldson UDM 300 Specifications

General

Brand	Donaldson
Model	UDM 300
Category	Measuring Instruments
Language	English

Summary

Introduction

Notes on Safety

Description

Installation

Directly in the compressed air system

Guidance on installing the UDM 300 directly into compressed air pipes.

Indirectly in the compressed air system

Guidance on installing the UDM 300 using a measuring chamber.

Mounting Recommendation

Recommendations for mounting the pressure dewpoint meters, favoring screw-on chambers.

The Right Measuring Chamber for Each Application

Selection guidance for measuring chambers based on specific application requirements.

Dew Point Diagram for Compressed Air

Technical Data

Instrument Versions

Connection Suggestions

Calibrating/Adjusting

Connection

UDM 300 Complete Instrument

UDM 300 - Complete Instrument with DS 52

The Instruments Operation (Adjustment of Alarm Values)