Dongfang Motor DF150GK Series User Manual

Assemble Instruction
--DF150GK series from Dongfang Motor INC
First thank you for your choose of our “DONGFANG” buggy and
now I will show you how to assemble the buggy.
1. When you get the package please remove all parts away from
the buggy for assemble.
2. The rear suspension
When you find the shock absorber, screw off the bolts upside.
Swing up the shock absorber to the end fixture and screw up.
Tighten it. The left side is the same alike.
3. The rear wheel
Hang up or raise the rear frame of the buggy. Take off the pin
and screw off the nuts. Choose a rear wheel of right side( check

Dongfang Motor DF150GK Series Specifications

General

Brand	Dongfang Motor
Model	DF150GK Series
Category	Utility Vehicle
Language	English

Summary

Dongfang DF150GK Assembly Guide

Prepare Assembly Parts

Unpack and organize all components before starting assembly.

Install Rear Suspension

Mount rear shock absorbers, ensuring proper tightening.

Attach Rear Wheels

Secure rear wheels to the axis using nuts and pins.

Fit Electrical Cover

Protect electrical components with the designated wiring cover.

Mount Fuel Tank

Install the fuel tank and connect the fuel line to the switch.

Assemble Front Suspension

Connect front swing arms and steering rod to the chassis.

Attach Front Wheels

Mount front wheels, using washers and the dust cover.

Install and Align Steering Wheel

Fix the steering wheel and adjust front wheel alignment.

Secure Seats and Seat Belts

Fasten seats and seat belts to the frame for safety.

Install Vehicle Battery

Place the battery and connect RED (+) and GREEN (-) wires.

Assemble Canopy Frame

Connect canopy, spare tire, and top frame sections.