Donner DC 87 - Microphone Usage Tips; Cable Management; Cable Wiring Check; Storage After Use

5
Secure the cable to the microphone
stand or boom while using, leaving a
slack loop at the microphone. This will
ensure the most effective shock isolation
and reduce the possibility of accidentally
pulling the microphone out of its mount.
5
The microphone cable should be
ensured that it is wired Pin 1
shield, Pin 2 (+), Pin 3 (-).
6
After use the DC 87 should be
wiped with a dry, soft cloth and
placed in its protective zip pouch.
7
SHIELD
1
2
3
COLD
HOT