Doodle Labs Smart Radio Integration Guide
Quick-Start Guide (Bench Testing)
This section includes a basic hardware setup, a quick peek at the software GUI, and an overview of the basic
network setup. When satisfied with the results, please consult the hardware integration section for
suggestions on how to integrate the Smart Radio with your system.
The Smart Radio is available in two forms, an embedded version (-M) which is designed to be embedded into
an end-product such as a router or a robot, and an external version (-E) which is designed to be used stand-
alone.
The Smart Radio evaluation kit contains an Ethernet connector board, two low-gain frequency-tuned
antennas, and all cables. This will allow quick bench testing of performance using a pair of laptops and off-
the-shelf power supplies.
For more details and datasheets, please visit: https://www.doodlelabs.com/smart-radio
To Next Page
Need help?
General
