Doogee P1 - User Manual

To Next Page



User Manual

Special instruction:

1. When connecting the remote control, please make sure that the mobile phone connected to the AP

hotspot of the projector, or the phone and projector connected in the same LAN.

2. The QR code will come out whenever short press the power button for twice.

3. After open the remote APP, if there is connection records, click any keys, it will be automatically

connected to the projector which is the most recent connection.

Projector overview

1. Connection instruction

1.1 Long press the power button to turn on the projector, enter the QR code interface.

Note: The hotspot name and password is below the QR code.

APhotspotandpassword

Need help?

Do you have a question about the Doogee P1 and is the answer not in the manual?

Summary

Details powering on the projector and entering the QR code interface for initial connection.

Explains opening the remote control APP and scanning the QR code to connect the device.

Confirms the remote control is connected to the projector before proceeding with Wi-Fi setup.

Guides on choosing a Wi-Fi network and entering the password to connect the projector.

Explains the process of re-scanning the QR code after a successful Wi-Fi connection.

Details the compliance of the equipment with FCC RF radiation exposure limits for uncontrolled environments.

General