- Page 9 of 60 -
Report No. STS200421001001E
IEC/EN 62368-1
Clause Requirement + Test Result - Remark Verdict
Shenzhen NTEK Testing Technology Co., Ltd
4 GENERAL REQUIREMENTS P
4.1.1 Acceptance of materials, components and
subassemblies
P
4.1.2 Use of components (See appended table 4.1.2) P
4.1.3 Equipment design and construction P
4.1.15 Markings and instructions .................................. : (See Annex F) P
4.4.4 Safeguard robustness P
4.4.4.2 Steady force tests .............................................. : (See Annex T.4) P
4.4.4.3 Drop tests .......................................................... : (See Annex T.7) P
4.4.4.4 Impact tests ....................................................... : N/A
4.4.4.5 Internal accessible safeguard enclosure and
barrier tests ........................................................ :
No such enclosure and barrier N/A
4.4.4.6 Glass Impact tests ............................................. : Surface area not exceeding 0.1m
2
N/A
4.4.4.7 Thermoplastic material tests ............................. : (See Annex T.8) P
4.4.4.8 Air comprising a safeguard ................................ : Considered, but no such barrier
or enclosure provided
N/A
4.4.4.9 Accessibility and safeguard effectiveness All safeguards remain effective P
4.5 Explosion P
4.6 Fixing of conductors P
4.6.1 Fix conductors not to defeat a safeguard P
4.6.2 10 N force test applied to .................................. : P
4.7 Equipment for direct insertion into mains socket -
outlets
No such apparatus N/A
4.7.2 Mains plug part complies with the relevant
standard ............................................................. :
N/A
4.7.3 Torque (Nm) ...................................................... : N/A
4.8 Products containing coin/button cell batteries No coin/button cell batteries used N/A
4.8.2 Instructional safeguard N/A
4.8.3 Battery Compartment Construction N/A
Means to reduce the possibility of children
removing the battery .......................................... :
4.8.4 Battery Compartment Mechanical Tests ........... : N/A
4.8.5 Battery Accessibility N/A
4.9 Likelihood of fire or shock due to entry of
conductive object ............................................... :
(See Annex P) P