Doogee S88Pro - Thermal Burn Injury & Radiation; Thermal Energy Source Safeguards; Radiation Safety Requirements

- Page 18 of 60 -
Report No. STS200421001001E
IEC/EN 62368-1
Clause Requirement + Test Result - Remark Verdict
Shenzhen NTEK Testing Technology Co., Ltd
8.10.1 General N/A
8.10.2 Marking and instructions N/A
Instructional Safeguard ........................................... :

8.10.3 Cart, stand or carrier loading test and compliance N/A
Applied force ........................................................... :

8.10.4 Cart, stand or carrier impact test N/A
8.10.5 Mechanical stability N/A
Applied horizontal force (N) .................................... :

8.10.6
Thermoplastic temperature stability (C) ................ :
N/A
8.11 Mounting means for rack mounted equipment N/A
8.11.1 General N/A
8.11.2 Product Classification N/A
8.11.3 Mechanical strength test, variable N .................... : N/A
8.11.4 Mechanical strength test 250N, including end stops N/A
8.12 Telescoping or rod antennas ................................. N/A
Button/Ball diameter (mm) ..................................... :

9 THERMAL BURN INJURY P
9.2 Thermal energy source classifications TS1: accessible parts P
9.3 Safeguard against thermal energy sources N/A
9.4 Requirements for safeguards N/A
9.4.1 Equipment safeguard N/A
9.4.2 Instructional safeguard ........................................... : N/A
10 RADIATION P
10.2 Radiation energy source classification P
10.2.1 General classification P
10.3 Protection against laser radiation N/A
Laser radiation that exists equipment:

Normal, abnormal, single-fault ............................ : comply with RS1 P
Instructional safeguard ........................................ :

Tool ...................................................................... : By tool

10.4 Protection against visible, infrared, and UV
radiation
LED system unit used. P