Doogee S88Pro - Simulated Single Fault Conditions; UV Radiation Testing

- Page 21 of 60 -
Report No. STS200421001001E
IEC/EN 62368-1
Clause Requirement + Test Result - Remark Verdict
Shenzhen NTEK Testing Technology Co., Ltd
B.3.7 Abnormal operating conditions as specified in
Clause E.2.
N/A
B.3.8 Safeguards functional during and after abnormal
operating conditions
N/A
B.4 Simulated single fault conditions P
B.4.2 Temperature controlling device open or short-
circuited .............................................................. :
N/A
B.4.3 Motor tests P
B.4.3.1 Motor blocked or rotor locked increasing the
internal ambient temperature ............................ :
N/A
B.4.4 Short circuit of functional insulation P
B.4.4.1 Short circuit of clearances for functional insulation (See appended table B.4) P
B.4.4.2 Short circuit of creepage distances for functional
insulation
(See appended table B.4) P
B.4.4.3 Short circuit of functional insulation on coated
printed boards
N/A
B.4.5 Short circuit and interruption of electrodes in
tubes and semiconductors
(See appended table B.4) P
B.4.6 Short circuit or disconnect of passive components (See appended table B.4) P
B.4.7 Continuous operation of components N/A
B.4.8 Class 1 and Class 2 energy sources within limits
during and after single fault conditions
P
B.4.9 Battery charging under single fault conditions ... : (See appended table M) P
C UV RADIATION N/A
C.1 Protection of materials in equipment from UV
radiation
No UV radiation within the EUT. N/A
C.1.2 Requirements N/A
C.1.3 Test method N/A
C.2 UV light conditioning test N/A
C.2.1 Test apparatus N/A
C.2.2 Mounting of test samples N/A
C.2.3 Carbon-arc light-exposure apparatus N/A
C.2.4 Xenon-arc light exposure apparatus N/A
D TEST GENERATORS N/A
D.1 Impulse test generators N/A