- Page 4 of 60 -
Report No. STS200421001001E
Shenzhen NTEK Testing Technology Co., Ltd
POSSIBLE TEST CASE VERDICTS:
- test case does not apply to the test object ................. : N/A
- test object does meet the requirement ...................... : P (Pass)
- test object does not meet the requirement ................ : F (Fail)
TESTING:
Date of receipt of test item ............................................ : 2020-06-05
Date (s) of performance of tests ................................... : 2020-06-05 to 2020-06-12
GENERAL PRODUCT INFORMATION:
-The maximum operating temperature is 35°C.
-A power source unit with output rating 12VDC, 2000mA was used during the tests.
The unit shall be charged by approved external approved adapter according to IEC/ EN 62368-
1:2014+A11:2017 and meet LPS requirements. The external power adapter rated parameter is “input: AC
100V-240V, 50/60Hz, 0.6A; output: DC 5V, 3000mA/DC7V, 3000mA/DC9V, 2700mA/12V, 2000mA”.
-Information of battery pack:
− Highest specified charging temperature: 60°C
− Lowest specified charging temperature: 0°C
− Maximum specified charging current: 4.0A
− Maximum specified charging voltage: 4.4VDC
Model Differences – Designation model is different only.
- N/A
Additional application considerations – (Considerations used to test a component or sub-assembly) –
- N/A
Copy of marking plate:
Remark:
-The above markings are the minimum requirements required by the safety standard. For the final production
samples, the additional markings which do not give rise to misunderstanding may be added.
-The CE marking and WEEE symbol (if any) should be at least 5.0 mm and 7.0 mm respectively in height.
-The manufacturer and importer detail information are showed in instructions.
To Next Page
Loading...
