- Page 41 of 60 -
Report No. STS200421001001E
EN 62368-1
Clause Requirement + Test Result - Remark Verdict
Shenzhen NTEK Testing Technology Co., Ltd
5.5.6
Finland, Norway and Sweden:
Resistors used as basic safeguard or bridging
basic insulation comply with G.10.1 and G.10.2.
N/A
5.6.1
Denmark:
Protection for pluggable equipment type A;
integral part of the equipment
N/A
5.6.4.2.1
Ireland and United Kingdom:
The protective current rating is taken to be 13 A
N/A
5.6.5.1
Ireland and United Kingdom:
Conductor sizes of flexible cords to be accepted
by terminals for equipment rated 10 A to 13 A
N/A
5.7.5
Denmark:
The installation instruction affixed to the
equipment if high protective conductor current
N/A
5.7.6.1
Norway and Sweden:
Television distribution system isolation text in user
manual
N/A
5.7.6.2
Denmark:
Warning for high touch current
N/A
B.3.1
and
B.4
Ireland and United Kingdom:
Tests conducted using an external miniature
circuit breaker or protective devices included as
an integral part of the direct plug-in equipment
N/A
G.4.2
Denmark:
Appliances rated ≤13 A provided with a plug
according to DS 60884-2-D1:2011.
P
Class I equipmentprovided with socket-outlets
provided with a plug in accordance with standard
sheet DK 2-1a or DK 2-5a.
If a single-phase equipment having rated >13 A or
poly-phase equipment provided with a supply
cord with a plug, plug in accordance with the
standard sheets DK 6-1a in DS 60884-2-D1 or EN
60309-2.
Mains socket outlets intended for providing power
to Class II apparatus rated 2,5 A in accordance
with DS 60884-2-D1:2011 standard sheet DKA 1-
4a.
Other current rating socket outlets in compliance
with Standard Sheet DKA 1-3a or DKA 1-1c.
Mains socket-outlets with earth in compliance with
DS 60884-2-D1:2011 Standard Sheet DK 1-3a,
DK 1-1c, DK1-1d, DK 1-5a or DK 1-7a
G.4.2
United Kingdom:
The plug part of direct plug-in equipment
assessed to BS 1363
N/A
To Next Page
Loading...
