① Remove the scooter charging port cover by turning the cover, insert the charging plug into the
recharge socket until you hear a “click” which means that the charging plug has connected with the
socket, then connect the charger’s input with an electrical supply. The indicator light turns green to red
means it starts charging and on the contrary, it is fully charged.
② The instrument cluster displays the current electric quantity when turning the power on while
charging.
Extra position charging
Open the battery compartments (see specific methods in graphic illustration set forth above)
Remove the battery from the scooter.
Insert the charging plug into the recharge socket until you hear “click” which means that the charging
plug has connected with the socket, then connect the charger input with an electrical supply. The
indicator light turns green to red means it starts charging and on the contrary, it is fully charged.
To Next Page
Loading...
