EasyManua.ls Logo

DoorHan BR-PRO4000LEDKIT User Manual

DoorHan BR-PRO4000LEDKIT
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
© DoorHan, 08.2022
Инструкция
Installation Manual
АВТОМАТИЧЕСКИЙ
ШЛАГБАУМ
BARRIER-PRO
Automatic Rising Boom
Barrier of Barrier PRO
Series
Общие сведения /
General Information
2
Монтаж /
Installation
3
Балансировка стрелы /
Boom Adjustment
5
Подключение питания /
Power Connection
6
Настройка крайних положений /
Travel Limits Adjustment
8
Монтаж фотоэлементов на стойку шлагбаума /
Installation of Photocells on the Barrier Post
9
Question and Answer IconNeed help?

Do you have a question about the DoorHan BR-PRO4000LEDKIT and is the answer not in the manual?

DoorHan BR-PRO4000LEDKIT Specifications

General IconGeneral
BrandDoorHan
ModelBR-PRO4000LEDKIT
CategoryAutomatic Barriers
LanguageEnglish

Summary

General Information

Product Characteristics and Specifications

Details technical specifications, boom length, opening time, voltage, and durability.

Installation

Foundation and Base Mounting

Covers initial installation phases including foundation preparation and securing the base.

Barrier Post Assembly and Internal Setup

Details steps for assembling the barrier post, installing internal mechanisms, and closing the housing.

Boom Adjustment

Attaching and Balancing the Boom

Guides on how to attach the boom and adjust its balance for smooth operation.

Power Connection

Initial Power Wiring and Connections

Illustrates initial steps for connecting power cables and internal wiring to the unit.

Final Power Wiring and Control Board Setup

Details final power connections and setup of the control board components for operation.

Travel Limits Adjustment

Setting Open and Closed Limit Positions

Instructions on how to set the precise open and closed positions of the barrier boom using limit switches.

Installation of Photocells

Mounting Photocells on the Post

Steps for physically attaching the photocell sensors to the barrier post.

Wiring Photocells to the Control Board

Covers wiring photocells to the control board and related programming information.

Related product manuals