To Next PageTo Next PageWhat to do if DoorHan DC Drives opener is not working?
If your DoorHan DC Drives opener isn't working, there are several potential causes: * **Non-reliable network cable plug connection:** Turn on the power supply. * **Obstacle for infrared rays:** Remove any obstacles. * **Chain coupling declutching:** Pull the manual chain to turn on the protective switch.
What to do if DoorHan DC Drives transmitter is not working?
If the DoorHan DC Drives transmitter isn't working, consider these solutions: * **Indicating light of transmitter is not glowing:** Adjust the limit switches. * Perform the repeated coding.
Why does my DoorHan DRIVE SHAFT-50PRO DC Drives opener disconnect suddenly?
If your DoorHan DC Drives opener suddenly disconnects, it might be due to frequent use. To resolve this, periodically cool the opener and reduce how often you use it.
What to do if the DoorHan DRIVE SHAFT-50PRO DC Drives door does not open and close completely?
If the DoorHan DC Drives door doesn't fully open or close, it's likely due to incorrect adjustment of the stroke limitations. Perform the proper stroke limitations adjustment to fix this.
General| Category | DC Drives |
|---|---|
| Maximum Torque | 50 Nm |
| Protection Level | IP54 |
| Voltage | 24 V |
| Speed | 24 rpm |
| Torque | 50 Nm |
| Protection Class | IP54 |
| Power Supply | DC |
| Operating Temperature | -20°C to +55°C |
Details the drive's automatic stopping, self-locking reducer, and terminal switches for safe operation.
Lists technical characteristics including torque, speed, dimensions, and operating temperature.
Outlines the standard components included with the drive unit upon delivery.
Provides essential safety precautions for installation, operation, and manual use.
Details electrical shock hazards, cable laying practices, and required cable specifications.
Identifies and illustrates the main components of the drive unit.
Lists the necessary tools required for the installation process.
Provides step-by-step instructions for mounting the drive directly onto the gate shaft.
Details the procedure for installing the drive using an optional chain gear system.
Covers the connection of the drive to the main electrical power supply.
Illustrates the wiring and connections for the control unit and accessories.
Shows wiring diagrams for photo sensors, optical sensors, and wicket sensors.
Procedure for setting the upper limit position of the gate.
Procedure for setting the lower limit position of the gate.
Guide to selecting and configuring different operational modes for the drive.
Detailed explanation of the 6 operational modes and their control logic.
Instructions for configuring the automatic closing function of the gate.
Procedure for setting and confirming the motor's rotation direction.
Configuration and adjustment of the safety sensors (guards).
Fine-tuning the upper limit position for precise gate movement.
Fine-tuning the lower limit position for precise gate movement.
Steps to save the configured drive settings.
Explains the meaning of various codes displayed on the control unit.
Procedure to register DoorHan remote controls with the drive's receiver.
Instructions for erasing all programmed remote controls from the receiver's memory.
Guidance on operating the gate manually during power outages.
Guidelines for routine checks and maintenance of the automatic system.
Explains the motor locking protection feature and its indicators.
Diagnosing frequency converter issues using indicator codes.
Diagnosing angular sensor failures based on indicator codes.
Information on thermal protection and its indicator signals.
Troubleshooting steps when the opener is not functioning.
Resolving issues where the opener disconnects unexpectedly.
Addressing problems with the gate not opening or closing fully.
Troubleshooting steps for non-responsive remote transmitters.
