DoorHan RSD01 User Manual

РУКОВОДСТВО ПО МОНТАЖУ И ЭКПЛУАТАЦИИ ВОРОТ RSD01, ECO FAST
INSTALLATION AND OPERATING INSTRUCTIONS FOR SECTIONAL DOORS RSD01, ECO FAST
MANUEL DE MONTAGE ET D'EXPLOITATION DE LA PORTE RSD01, ECO FAST
AANWIJZINGEN BETREFFENDE GEBRUIK EN ASSEMBLAGE VAN DE POORT RSD01, ECO FAST
INSTRUZIONI SUL MONTAGGIO E SULL'UTILIZZO DELLA PORTA RSD01, ECO FAST
INSTRUCCIONES PARA EL MONTAJE Y FUNCIONAMIENTO DE LAS PUERTAS RSD01, ECO FAST
INSTRUKCJA MONTAŻU I EKSPLOATACJI BRAMY RSD01, ECO FAST
INSTALLATIONS OG BRUGSANVISNINGEN FOR PORTEN RSD01, ECO FAST
NAVODILA ZA MONTAŽO IN UPORABO VRAT RSD01, ECO FAST
INSTALLASJONS OG BRUKSANVISNINGEN FOR PORTEN RSD01, ECO FAST
INSTALLATIONS OCH BRUKSANVISNINGEN FÖR PORTEN RSD01, ECO FAST
INSTRUCŢIUNI DE INSTALARE ŞI FUNCŢIONARE A PORŢII RSD01, ECO FAST
ΟΗΓΙΕΣ ΣΥΝΑΡΜΟΛΟΓΗΣΗΣ ΚΑΙ ΧΡΗΣΗΣ ΤΗΣ ΠΟΡΤΑΣ RSD01, ECO FAST
ANLEITUNG FÜR MONTAGE, BETRIEB UND WARTUNG DES TORES RSD01, ECO FAST
KAPU SZERELÉSI ÉS ÜZEMELTETÉSI ÚTMUTATÓJA RSD01, ECO FAST
INSTRUÇÕES DE MOTAGEM E MANUTENÇÃO DE PORTÕES RSD01, ECO FAST
NÁVOD NA MONTÁŽ A POUŽÍVÁNÍ VRAT RSD01, ECO FAST
滑升门安装和操作规范 RSD01, ECO FAST
               

DoorHan RSD01 Specifications

General

Type	Electromechanical
Voltage	220-240V
Frequency	50 Hz
Maximum Door Width	3.5 m
Number of Remotes	2
Protection	IP20
Balancing Springs Resource	25000 cycles
Control	Remote control

Summary

General Safety Precautions

Installation Safety Warnings

Key safety instructions including keeping children away and checking parts.

General Installation Guidance

Installation Screw Requirements

Specifies requirements for screws used during installation.

Installation Crew Requirements

Details the recommended number of personnel for installation.

General Installation Requirements

Outlines essential criteria for proper track and wall mounting.

Installation Responsibility

Defines the liability concerning the installation process.

Parts and Components Identification

Main Installation Parts

Visual identification of main installation components numbered 1 through 16.

Additional Components and Fasteners

Identification of components numbered 17-26 and fastener types A-H.

Sectional Door Installation Steps

Step 1-2: Wall Preparation and Track Alignment

Aligns door opening dimensions and vertical tracks, then secures vertical tracks.

Step 3: Horizontal Track Installation

Attaches horizontal tracks to the ceiling structure.

Step 4-5: Door Panel Alignment and Fastening

Ensures panel alignment and secures them using specified hardware.

Step 6-8: Hanger and Frame Installation

Mounts vertical, top, and bottom frame components for the door.

Step 9-10: Intermediate and Top Bracket Installation

Mounts intermediate hangers and top track brackets.

Step 11-13: Center, Bottom Hangers and Roller Brackets

Installs center hangers, bottom hangers, and roller brackets.

Step 14-16: Final Assembly and Safety Features

Installs handles, spring mechanism, and safety locks.