To Next PageTo Next PageWhat to do if the Doortec DOORMAN SDO1 wall button works but the transmitter doesn’t?
If the wall button for your Doortec Door Opening System works but the transmitter does not, it's likely that the transmitter program is lost or the transmitter battery is flat. You can re-code the transmitter, referring to section 6.4, or replace the transmitter battery with a new one.
Why doesn't my Doortec DOORMAN SDO1 motor close?
If the motor of your Doortec Door Opening System doesn't close, the photo beam function might be enabled. Cancel the photo beam function; refer to section 6.7.
Why doesn’t the Doortec DOORMAN SDO1 motor open or close?
If the motor of your Doortec Door Opening System does not open or close, it might be due to no limits being set. Check the limit settings.
Why is the Doortec DOORMAN SDO1 transmitter distance too short?
If the transmitter distance for your Doortec Door Opening System is too short, the transmitter battery is likely nearly flat. Replace it with a new battery.
General| Brand | Doortec |
|---|---|
| Model | DOORMAN SDO1 |
| Category | Door Opening System |
| Language | English |
