Need help?Do you have a question about the Doosan DVF Series and is the answer not in the manual?
General| Control Type | CNC |
|---|---|
| Machine Dimensions | Varies by model |
| Machine Weight | Varies by model |
| Spindle Speed Range | Up to 15, 000 RPM |
| Positioning Accuracy | ±0.005 mm |
| Repeatability | ±0.003 mm |
| Axis Control | 5-Axis |
| Table Load Capacity | 500 kg |
Essential safety rules and general precautions for machine operation.
Safety procedures and checks for machine installation.
Precautions related to electrical power supply and connections.
Safety measures during machine setup and initial operation.
Safety guidelines for operating the machine in automatic mode.
Safe methods for stopping machine operations.
Procedures for safely completing machining and shutting down power.
Safety precautions for maintenance and adjustments.
Details on AWC power switches, their layout, and control.
Explains symbols and basic screens for AWC operation.
Covers jog operation, workpiece transfer, and teaching screens.
Provides in-depth operational procedures for the AWC.
Step-by-step guide for setting up transfer teaching.
Procedure for setting the origin for the index.
How the AWC operates based on registered schedules in the AWC ORDER table.
Lists common AWC alarms and their corresponding countermeasures.
Alarm for servo drive issues and how to check the servo drive.
Alarm indicating low servo battery and replacement instructions.
Alarm for overload or circuit breaker trip and how to check it.
Alarm for servo drive issues and how to check the drive.
Alarm for low input power or broken motor power cable.
Alarm for high input voltage or damaged regenerative discharge resistance.
Alarm for high heat sink temperature or operation frequency.
Procedure for loading PLC software using an SD card.
Configuration steps for machine Ethernet IP settings.
To Next Page
