Doosan Ingersoll Rand P425 WIP User Manual

OPERATION & MAINTENANCE MANUAL
COMPRESSOR MODELS
P425 WIR
XP375 WIR
HP375 WIR
Code: C
Doosan Infracore Portable Power
P.O. Box 868 - 501 Sanford Ave
Mocksville, N.C. 27028
www.doosanportablepower.com
Book: 23209307 (01/08) Rev C
This manual contains important safety information.
Do not destroy this manual.
This manual must be available to the personnel who operate and maintain this machine.
Revised (09-12)
Doosan purchased Bobcat Company from Ingersoll-Rand Company in
2007. Any reference to Ingersoll-Rand Company or use of trademarks,
service marks, logos, or other proprietary identifying marks belonging
to Ingersoll-Rand Company in this manual is historical or nominative
in nature, and is not meant to suggest a current affiliation between
Ingersoll-Rand C
ompany and Doosan
Company or the products of
e
ith
er.

Doosan Ingersoll Rand P425 WIP Specifications

General

Brand	Doosan
Model	Ingersoll Rand P425 WIP
Category	Air Compressor
Language	English

Summary

Foreword

Manual Introduction and Disclaimers

Provides context on manual's proprietary nature, warranty, scope, and intended uses.

Decals

Graphic Symbol Meanings

Explains ISO symbols and warning signs for hazard identification on machines.

Noise Emission

Noise Emission Control Log and Warranty

Details maintenance log, warranty, and schedule for noise emission controls.

Safety

General Safety Guidelines

Covers safety levels (DANGER, WARNING, CAUTION, NOTICE) and basic operational safety.

Specific Safety Precautions

Addresses hazards of compressed air, materials, battery, radiator, transport, and chains.

General Arrangement

Machine Layout and Dimensions

Illustrates machine layout, provides dimensions, and identifies access points.

Compressor and Engine Specifications

Details technical specifications for compressor performance and engine data.

Operating Instructions

Pre-Operation Checks and Controls

Covers pre-start checks, control panel functions, and diagnostic indicators.

Machine Starting and Stopping

Details procedures for starting, stopping, emergency stops, and monitoring.

Lubrication

Service Interval Chart

Summarizes lubrication and maintenance tasks and their recommended intervals.

Daily Checks and Oil Maintenance

Covers daily pre-start checks and procedures for changing engine oil and filters.

Fuel System Maintenance

Details procedures for replacing fuel filter elements and bleeding the fuel system.

Troubleshooting Engine Issues

Provides common engine problems, causes, and solutions for diagnosis.

Maintenance

Maintenance Schedule Summary

Table outlining maintenance items, checks, and intervals for machine upkeep.

Routine Maintenance Procedures

Detailed steps for performing regular maintenance tasks on machine components.

Machine Systems

Electrical System Overview

Presents system key, schematics for engine interface, harness, and CAN communication.

Service Tools

Tools for Electronic Systems

Lists special tools recommended for electronic system service and repair.

Electrical Parts List

Catalog of electrical parts with part numbers and quantities per machine.

Fault Finding

Troubleshooting Common Faults

Guide to diagnosing and resolving common machine faults with tables of issues, causes, and remedies.

Options

Lubricator Option Details

Covers safety, general information, and operation for the lubricator option.