Need help?Do you have a question about the Doran 2200CW Series and is the answer not in the manual?
Instructions for safely removing the scale from its packaging and handling precautions.
Explanation of the indicator lights (NET, battery, zero) on the scale's front panel.
Instructions on how to turn on the scale using the power cord or battery.
Steps for performing a basic weighing operation on the scale.
Function of the ZERO button for zeroing the scale and returning to gross mode.
Process of taring the scale to net weight using the TARE button or keyboard entry.
How to switch between gross and net weighing modes on the scale.
Function of the UNITS button to change the displayed unit of measure.
How to transmit data from the scale to a printer or external device.
Using OVER/UNDER buttons to set checkweigh limits.
Methods for manually or automatically powering off the scale.
How the scale indicates a low battery status.
Steps and information on how to recharge the scale's battery.
Steps for performing three-band checkweighing.
How to enter and view checkweigh limits using digital or reference entry.
Steps for performing five-band checkweighing.
How to enter and view high/low limits using digital or reference entry.
Steps for performing zero-band checkweighing.
Using a reference weight to set limits for zero-band checkweighing.
How to load a stored product ID via number or barcode scan.
Steps for creating a new product ID and viewing the current one.
Processes for logging into and out of the scale using a user ID.
Using a barcode scanner to enter user ID values.
Covers accumulator/counter operation, display, clearing, and data output.
Information on connecting the power supply and replacing the fuse.
Wiring instructions for RS232 ports and remote switch connections.
Methods to access and exit the calibration and setup menus.
Procedure to set the maximum capacity of the scale.
How to set the scale's resolution or count by value.
Steps for performing the scale calibration process.
List and explanation of common calibration error codes.
Methods to access and exit the calibration and setup menus.
How to move through the scale's parameter menu structure.
Details on adjusting the scale's capacity.
Configuration of the scale's count by or resolution.
Procedures for zero calibration and entering calibration weight.
Settings for the display filter to adjust response speed.
Configuration of the automatic zero tracking range.
Settings for motion aperture and delay for motion indication.
Configuration of start-up zero behavior and tare input methods.
Configuration for zero on demand feature.
Configuration for print on demand feature.
Selection of operating modes (standard, NTEP, CWM).
Options for exiting calibration and setup modes.
Enables or disables specific unit selections for the scale.
Configures the startup units displayed on power up.
Settings for the automatic off timer.
Configuration for threshold level entry for automatic printing.
Options to restore factory default parameter values.
Information on counts, LED brightness, and battery operation settings.
Configures data output mode for Serial Port 1.
Selects data output format for Serial Port 1.
Configures data output mode for Serial Port 2.
Selects data output format for Serial Port 2.
Configures data output mode for Wired Ethernet.
Selects data output format for Wired Ethernet.
Configuration for static or DHCP IP address assignment.
Static IP address assignment settings for the scale.
Setting the subnet mask for network configuration.
Setting the IP gateway for network connectivity.
Configuration of the TCP port number for the scale.
Displays the unique Ethernet MAC address.
Adjustments for 4mA and 20mA analog output points.
Configures data output mode for Wireless Ethernet.
Selects data output format for Wireless Ethernet.
Static IP address and subnet mask configuration.
Configuration for IP gateway and TCP port number.
Settings for idle timeout and display of Ethernet MAC address.
Displays the status of the wireless network connection.
Configures data output mode for Bluetooth.
Selects data output format for Bluetooth.
Configures data output mode for USB.
Lists various checkweigh operation modes and their descriptions.
Defines status conditions for three, five, and zero-band checkweighing.
Overview of the four data transmission modes available.
Details on Auto Print 1, 2, and 3 data transmission modes.
Details on standard and dual unit lb/kg output formats.
Details on label printer output and model 8000 emulation formats.
Formats for custom data strings 1 and 2.
Formats for custom data strings 3 and 4.
Information on internal relay setup and technical specifications.
Common issues with the scale and steps to diagnose and resolve them.
Explains common messages displayed on the scale and their meanings.
General| Touchscreen | Yes |
|---|---|
| Operating System Compatibility | Windows, Linux |
| Serial Ports | 1 x RS-232/422/485 |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Display Type | TFT LCD |
| Interface | Ethernet, USB |
| Humidity | 10% to 90% non-condensing |
| Mounting | Panel |
To Next Page