This document describes the Dorel Asia Twin Bunk Bed, model numbers DA7519E and DA7519W. It functions as a versatile sleeping solution, capable of being assembled as a twin bunk bed or converted into two separate single beds.
Function Description
The primary function of this product is to provide a space-saving sleeping arrangement as a twin bunk bed. The bunk bed configuration features an upper and a lower bunk, designed for children aged 6 years and older. A key feature is its convertibility; the bunk bed can be disassembled and reassembled into two individual single beds, offering flexibility as needs change. The design incorporates guardrails for safety on the upper bunk and a ladder for access.
Important Technical Specifications
Model Numbers:
- DA7519E (Espresso finish)
- DA7519W (White finish)
UPC Codes:
- DA7519E: 0-65857-17346-8
- DA7519W: 0-65857-17347-5
Maximum Weight Capacity:
- 165 lbs (75 kgs) per level.
Mattress Specifications:
- Upper and Lower Bunks: Use only coil spring mattresses on both the upper and lower bunks.
- Recommended Mattress Dimensions: 74"-75" long and 37 1/2" - 38 1/2" wide.
- Mattress Thickness: Ensure mattress thickness does not exceed 6".
- Guardrail Safety: The top surface of the mattress must be at least 5" (127mm) below the upper edge of guardrails.
Hardware List (Key Components and Quantities):
- Joint Connectors (4mm Hex Head): 16 pcs (Ø1/4" x 100mm), 14 pcs (Ø6.5mm x 48mm), 22 pcs (Ø6.5mm x 42mm)
- Flat Head Wood Screws: 24 pcs (Ø4mm x 35mm), 6 pcs (Ø4mm x 30mm)
- Wood Dowels: 4 pcs (Ø19mm x 95mm), 34 pcs (Ø10mm x 50mm)
- Barrel Nuts: 16 pcs (Ø11.8mm x 15mm)
- Allen Key: 1 pc
- Stopper: 24 pcs
Parts List (Key Components and Quantities):
- Posts: Top Post (3 pcs), Bottom Post (4 pcs)
- Headboards: Top Headboard Top Cross (2 pcs), Headboard Bottom Cross (4 pcs), Top Headboard Slat (12 pcs), Bottom Headboard Slat (12 pcs), Top Headboard Panel (2 pcs), Bottom Headboard Panel (2 pcs), Bottom Headboard Top Cross (2 pcs)
- Side Rails: Top Side Rail (with 3 holes) (1 pc), Bottom Side Rail (with 2 holes) (1 pc), Top Side Rail (with 1 hole) (1 pc), Bottom Side Rail (with no hole) (1 pc)
- Slats: 12 pcs (for bed base), 4 pcs (for headboard)
- Guardrails: Long Guardrail (2 pcs), Short Guardrail (2 pcs), Guardrail Leg (2 pcs)
- Ladder: Long Ladder End (1 pc), Short Ladder End (1 pc), Ladder Step (4 pcs)
Usage Features
Assembly:
The product requires assembly, with detailed step-by-step instructions provided. An Allen key is included for assembly.
Safety Warnings:
- Strangulation Hazard: Never attach or hang items to any part of the bunk bed that are not designed for use with the bed, for example, but not limited to hooks, belts, and jump ropes.
- Fall Hazard: The mattress platform is designed to support a mattress without the need for a posture board or box spring. Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.
- Coil Spring Mattresses Only: Use only coil spring mattresses on both the upper and lower bunks. Failure to do so can result in injury.
- Guardrails: Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and wall.
- Periodical Checks: Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free from damage, and that all connectors are tight.
- No Horseplay: Do not allow horseplay on or under the bed and prohibit jumping on the bed.
- No Substitute Parts: Do not use substitute parts. Contact customer service for replacement parts.
- Night Light: Use of a night light may provide added safety precaution for a child using the upper bunk.
- Water or Sleep Flotation Mattresses: The use of water or sleep flotation mattresses is prohibited.
- Ladder Use: Always use the ladder for entering and leaving the upper bunk.
- One Person Per Bunk: Prohibit more than one person on upper bunk.
- Keep Instructions: Keep these instructions for future use.
Conversion to Single Beds:
The bunk bed can be converted into two single beds by:
- Removing the ladder and all the guardrails.
- With the help of another person, remove the top bunk from the lower bunk.
- Disassemble the side rails from all headboards (top and lower bunks).
- Re-assemble the headboards (with tall posts) and footboards (with short posts) to side rails.
- Note: Switching the headboards will allow the two single beds to be identical (the headboards will have taller posts and the footboards will have the shorter posts).
Maintenance Features
Care and Cleaning:
- Dust regularly with a soft, dry cloth.
- Do not recommend the use of chemical cleaners or wax on our lacquered furniture as it may damage the finish.
- Keep solvents, alcohol, nail polish, and polish removers away from your hardwood furniture surfaces.
Maintenance:
- Check bolts/screws periodically and tighten them if necessary.
Limited Warranty:
Dorel warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers 1 year from the date of original purchase. This warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse, or which has been altered or repaired in any way. This warranty gives you specific legal rights and you may also have other rights which vary from State to State.
Customer Service:
- If any parts are missing or damaged, contact customer service.
- Phone: 1-800-295-1980
- Email: das@dorel.com
- Fax: 514-353-7819
- Address: Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1.
- Important: Do not return product to the store.
To Next Page
Need help?
General
