DOREL Living DA8377-E - Step 7: Final Ladder Attachment

STEP 7
TWIN LOFT BED
DA8377 / DA8377-E / DA8377-BL / DA8377-BK / DA8377-GR
Attach the ladder to the short guardrails (J), the side rail (G) with wood joint connectors (2) as shown
below.
Use Allen key (7) to tighten all the joint connectors previously installed.
NOTE: If slat (M) is covering the ladder mounting holes, temporarily remove slat (M) and place it after
the ladder is attached.