Dorel BR1414B2 - Step 1: Attaching Side Panels

STEP 1
Insert wood dowels (1) into side panels (A).
Attach front/back panel (B) to side panels (A) with bolts (3), spring washers (4) and Allen key
(2) as shown. Do not fully tighten the bolts.
3 IN 1 UPHOLSTERED CRIB
BR1414B2
1
3
4
B
A
A
INSIDE
NOTE:
The front/back panels (B) is
labeled "INSIDE." To ensure
proper assembly, the front/back
panels (B) must be attached to
side panels (A) so that the
INSIDE label face inside the crib.