To Next PageTo Next Page
Need help?Do you have a question about the Dorel BR1405B4 and is the answer not in the manual?
General| Brand | Dorel |
|---|---|
| Model | BR1405B4 |
| Category | Baby & Toddler Furniture |
| Language | English |
This booklet contains vital safety information. Please read and keep for future reference.
Contact customer service for missing or damaged parts. They will replace parts free of charge.
Provides phone number, email, and mailing address for customer service inquiries and part orders.
Failure to follow warnings can result in injury or death. Read all instructions and check for damaged parts.
Avoid cords, strings, and loose fasteners near cribs to prevent strangulation risks.
Never use soft bedding, ensure correct mattress size, and avoid gaps to prevent suffocation/entrapment.
Stop use when child climbs out or exceeds height/weight limits. Follow SIDS recommendations.
Ensure all parts are present, assemble on a soft surface, and avoid power tools. Adult assembly required.
Phillips head screwdriver not included. Assembly requires two people and takes approximately 30 minutes.
Dust with a lint-free cloth. Use a damp cloth for cleaning, dry immediately. Avoid abrasives and extreme environmental conditions.
Periodically check and tighten all bolts and screws to ensure product stability and safety.
One-year warranty against material/workmanship defects, limited to repair/replacement of components. Proof of purchase required.
Detailed list and diagrams of all hardware components required for assembly, including bolts, washers, dowels, and nuts.
Identifies all furniture parts required for assembly, including posts, panels, headboard, and mattress support.
Insert bolts clockwise until tight, then loosen slightly. Fully tighten all bolts after complete assembly. Use wax/soap for easier assembly.
Connect the front rail (G) to the front panel (F) using the provided wood dowels (6).
Attach front posts (A, B) to the front panel (F) using bolts (1, 2) and washers (8). Tighten with Allen key (5) and insert caps (I).
Attach side panels (D, E) to posts (A, B) and front rail (G) using dowels (6), bolts (1), nuts (9), and washers (8). Tighten with Allen key (5).
Attach the mattress support (H) to posts (A, B) and side panels (D, E) using bolts (3) and washers (7). Tighten with Allen key (5).
Insert dowels (6) into side panels (D, E). Attach headboard (C) using bolts (4) and washers (8). Tighten with Allen key (5).
Detach front panel and adjust mattress support to lowest position. Ensure all bolts are secured.
Follow specific steps from crib assembly, omitting the front panel attachment.
Convert crib to a full-size bed by attaching a metal bedframe to the headboard (C).
Convert crib to a full-size bed by attaching metal bedrails to the headboard (C) and front rail (G).
