Dorel DA4162ND - Page 6

2-IN-1CRIB
DA4162ND
NOTE: PLEASE MAKE SURE THE TEETHING RAILS ON THE
STATIONARY SIDE (B) ARE FACING UP.
CRIB ASSEMBLY INSTRUCTION
NOTE: When inserting bolts, turn clockwise until tighten. Then loosen 1/2"-3/4"
of a turn. After crib is completely assembled, return to each bolt and tighten.
Use wax or soap on all bolts to facilitate assembly.
SIDE FRAME (A)
STATIONARY SIDE (B)
-3-