DORNA TECHNOLOGY H300-02D2T4G - User Manual

H300 Series Inverter
User Manual (V1.0)

Summary

Safety Precautions

Attentions - please follow these instructions when using the inverter.

Key safety instructions for operating the inverter correctly.

Attentions - when scrapping the inverter.

Safety guidelines for the disposal of scrapped inverters.

Environmental requirements for installation of inverters:

2 Wirings

2.1 Standard wiring diagrams

2.2 Main circuit wirings

2.3 Control circuit wirings

3 Panel operations

3.1 Keyboard interface

3.3 Motor parameter auto-tuning

4 Function codes (Parameters)

4.1 Monitoring parameters: d0.00-d0.65

4.2 Basic functions group: P0.00-P0.28

Covers fundamental inverter functions and parameters.

4.3 First motor parameters: P1.00-P1.37

Parameters for initial motor setup and configuration.

4.4 Vector control parameters: P3.00-P3.22

Parameters specific to vector control mode.

4.5 V;F control parameters: P2.00-P2.27

Parameters for Voltage/Frequency control mode.

4.6 Input terminals: P4.00-P4.39

Configuration options for digital and analog input terminals.

4.7 Output terminals: P5.00-P5.22

Configuration options for digital and analog output terminals.

4.8 Start;stop control: P6.00-P6.15

Parameters for controlling inverter start and stop functions.

4.9 Keyboard and display: P7.00-P7.14

Settings for keyboard operation and display functions.

4.10 Auxiliary functions: P8.00-P8.54

4.11 Fault and protection: P9.00-P9.73

Settings for fault detection and protection mechanisms.

4.12 PID functions: PA.00-PA.28

Parameters for Proportional-Integral-Derivative (PID) control.

4.15 Communication parameters: PD.00-PD.06

4.17 Torque control parameters: B0.00-B0.08

4.18 Control optimization parameters: B5.00-B5.09

5 Fault and solutions

5.1 Alarms and solutions

Lists common alarms and their corresponding troubleshooting steps.

5.2 Other fault and solutions

7 MODBUS communication protocol

7.1 Communication protocol

DORNA TECHNOLOGY H300-02D2T4G Specifications