1 2 3 4
Note! All illustraons are for illustrave purposes only and
may not accurately depict the actual device.
The items supplied with your phone might vary depending
on the soware and accessories available in your region or
oered by your service provider. You can obtain addional
accessories from your local Doro dealer. The supplied
accessories provide the best performance with your phone.
2. GET TO KNOW YOUR PHONE
Start-up wizard
Start-up wizard
When starng the telephone for the rst me, you are
guided by the Start-up wizard to set some basic sengs.
2.1.
Descripons in this document are based on your phone’s
setup at the me of purchase. Instrucons normally start
from the start screen. Press to reach the start
screen. Some descripons are simplied.
The arrow () indicates next acon in step-by-step
instrucons.
2.2.
:
• Dial a number or answer incoming call.
• Enter the call log.
:
• End calls or return to the start screen.
• Long press to power on or o.
:
• Press to make an assistance call.
:
• Return to the previous screen.
:
• Press to iniate the camera app.
1. When a call comes in, press
to silence the
ringsignal.
3.4.
Received, missed, and dialed calls are saved in a call log.
1. Press .
2. Use / to scroll through the call log
= Incoming call
= Outgoing call
= Missed call
3. Press to dial the highlighted number.
4. CONTACTS
From the start screen you can use the sokey to access
your contacts.
4.1.
1. Press
-New-
2. Enter contact informaon.
3. Press
Add
to open more informaon elds.
4. When done, press
OK
.
Tip: Depending on the selected storage locaon, the types
of informaon you can save may vary.
Doro 7070
Quick Start Guide
English
Tip: Take care not to scratch the metallic contacts on the
cards when inserng them into the card holders.
1.2.
While it’s possible that your phone will already come with
enough charge to be powered on right out of the box, we
recommend to give it a full charge before rst use.
Only use baeries, chargers and accessories that have
been approved for use with this parcular model.
Connecng other accessories may be dangerous and may
invalidate the phone’s type approval and warranty.
When the baery is running low, appears and a
warning signal is heard. Connect the mains adapter to a
wall socket and to the charging socket y or place the
device in a charging cradle.
Alternavely connect the cable to the charging socket
y on the phone and to a USB port on a computer.
1.3.
When the baery is fully charged, disconnect the charger
from the device and unplug the charger from the wall
socket.
To save power the screen goes o aer a while. Press any
buon to wake. Baeries degrade over me, which means
that call me and standby me will normally decrease with
regular use. During extended operaon, the device may
feel warm. In most cases, this is normal. To avoid geng
too warm, the device may switch o during charging.
1.4.
1. Press and hold to turn on and o.
2. If the SIM card is valid but protected with a PIN code
(Personal Idencaon Number),
PIN
appears. Enter
the PIN code and press
OK
. Delete with
.
Note! If PIN and PUK codes were not provided with your
SIM card, please contact your service provider.
shows the number of PIN aempts le. When
no more aempts remain,
appears. The SIM
card must now be unlocked with the PUK code (Personal
Unblocking Key).
1. Enter the PUK code and conrm with
OK
.
2. Enter a new PIN code and conrm with
OK
.
3. Re-enter the new PIN code and conrm with
OK
.
:
• The selecon buons have mulple funcons. The
current funcon is shown above the selecon buon
on the screen. During a call the selecon buons give
access to addional funcons.
• (A) Use the
to navigate up and
down and to the le and to the right.
• (B) Use the
to open the
and to conrm
acons.
A
B
Note! Navigaon in some third party apps might work
dierently.
Use + and - on the side to adjust the sound volume. During
a phone call, it adjusts the earpiece volume. The volume
level is indicated on the screen.
The default language is determined by the SIM card.
.
2.3.
From the start screen, press to select
,
Wi-Fi
,
or
.
Note!
The ashlight drains the baery very quickly.
Remember to turn o the ashlight aer use.
2.4.
• Press the buon corresponding to the leer unl the
appropriate character appears.
• Press
*
for a list of special characters. Select the
desired character using the
and
press
to enter it.
• Use the
to move the cursor
within the text.
• Press
to erase characters.
• Press
for more opons.
• Press
#
to cycle upper case, lower case and numerals.
1. Press and hold
#
for a list of available languages.
2. Select language with / and press
OK
to conrm.
For fast and accurate typing, you can use the intelligent
predicve text input method.
1. While texng, press
#
to select input method.
Note: For internaonal calls, always use + before the
country code for best operaon. Press
*
twice for the
internaonal prex
+
.
You can dial or save phone numbers with pauses for use with
automated systems, such as voice mail or credit card billing
numbers. There are two types of pauses available on your
phone, press
*
repeatedly unl desired character is shown.
2.5.
Displays the date, the me and nocaons.
3. CALLS
3.1.
1. Enter the phone number.
2. Press to call.
3. Press to end the call.
Note!
There is no dial tone. Simply have the phone turned
on and it is ready for use.
3.2.
1. Press to open
.
2. Use / to scroll through the contacts, or press
the buon corresponding to the rst leer of the name
to quick search.
3. Press to dial the selected entry, or press to
return to the start screen.
3.3.
1. To answer an incoming call when the ip is closed, open
the ip.
2. Press to answer.
4.2.
Use the numerical buons
0
–
9
to speed dial.
1
is designated for the voice mailbox
Press and hold to call the speed dial.
Top 10:
Top 10
are the rst 10 listed contacts in the phonebook.
Set a contact as one of your top 10 contacts.
Top 10
4.3.
First responders can access addional informaon such
as medical informaon from the vicm’s phone in case
of emergency. In the event of a trauma, it is crical to
have this informaon as early as possible to increase the
chances of survival. All elds are oponal, but the more
informaon provided the beer.
1. Press
ICE
.
2. Use / to scroll the list of contacts.
3. Press
Edit
to add or edit informaon in each eld.
Delete with
.
4. Press
Save
when done.
5.
As long as the phone is switched on, it is always possible
to place an SOS call by entering the main local emergency
number for your present locaon followed by .
Some networks accept calls to emergency numbers without
a valid SIM card. Contact your service provider for more
informaon.
Note!
Somemes an emergency call cannot be placed due to
network, environment or interference issues.
6. ASSISTANCE BUTTON
The Assistance buon on the back of the phone allows easy
access to contact your predened help numbers should
you need help. Make sure that the assistance funcon is
acvated before use. See the full manual on how to acvate,
how to enter recipients in the numbers list, and how to edit
the text message.
7.
Note: To get sharp photos, wipe the lens clean with a dry
cloth.
1. Press the shortcut buon , or, press
.
2. Press or
OK
to take a photo.
8.
8.1.
Create, edit and read messages. A text message will be
converted to a picture message automacally when media
les (music, video etc.) are aached.
1. Press
New
.
2. Enter the recipients phone number in the
To
eld.
Or press
to select a recipent from your
contacts.
3. Scroll through your contacts.
Or
a contact, press the buon corresponding to
the rst leer of your contact’s rst or last name or the
full name. Press
to select a contact.
4. Press
to add more recipients.
5. Select
and type your message.
6. Press
for further opons.
7. When done, press
.
Note!
If you choose to send to mulple contacts, you will
be charged for each one.
Some features uses Internet data services and that can be
costly. We recommend that you check your data service
rates with your service provider.
9.
You need an Internet connecon to use the Internet
and the e-mail features. To reduce data trac costs, it is
recommended to use Wi-Fi connecons when available,
instead of using the more costly Mobile Data Connecon.
Contact your service provider for detailed subscripon
costs before acvang.
You may already have Wi-Fi in your home and it’s oen
available at workplaces. Take advantage of free networks in
coee shops, hotels, trains and libraries. Connecng to the
Internet with Wi-Fi doesn’t incur addional data trac costs,
unless you have to pay to get on the wireless network.
1. Press
Wi-Fi
.
2. Select
.
3. Select
and select the network you
want to connect to
.
4. If the network is secured with a password, enter the
password and select
.
Tip: is shown in the status bar when connected.
You can easily turn on and o Wi-Fi from the
:
• From the start screen, press to select
Wi-Fi
.
Note! Keep in mind that your phone remembers Wi-Fi
networks you connect to. If Wi-Fi is turned on, the phone
automacally connects to the network next me you are
within reach. Some open networks require you to log in to
a webpage before gaining access to the network.
To Next Page
Need help?
General
