Doro FORMULA 5R - System Settings

8
English
System settings
System PIN is 0000 on delivery.
1. Press . Scroll to BS SETTINGS. Press OK.
2. Scroll to desired function. Press OK.
3. Enter the desired setting. Press OK.
BS RINGER/ The base unit’s ringer signal can be adjusted. Only applies to Formula 5r.
RING VOLUME
DELETE HS To de-register a handset.
WARNING: A deregistered handset can no longer be used with the system!
FLASH TIME Recall time.
LONG=New Zealand. MEDIUM=France/Portugal. SHORT=others incl. UK/AUS.
CHANGE PIN The code (e.g. 0000) can be changed.
Expanded system (Two or more handsets e.g duo, trio...)
The call number for internal calls will be shown in the display in standby mode. The base unit
should be positioned centrally so that the coverage area is roughly equal for all handsets.
Intercom / internal call
1. Press (right menu button).
2. If using more than 2 handsets: Enter call number
1
-
5
for the desired handset or press
9
for all.
A tone will be heard if an external call comes in while an internal call is in progress. End the
internal call with
L
and then answer the external call with
q
.
Transferring calls/Conference between handsets
1. When an external call is connected;
2. Press . Scroll to INTERCOM. Press OK.
3. If using more than 2 handsets: Enter call number
1
-
5
for the desired handset or press
9
for all.
4. To transfer: press
L
, For conference: hold
*
pressed down.