4
English
Setting the alarm time
Press the jog wheel button. The display will light up
and the hours and the symbol will blink.
Turn the jog wheel to set the hours and press the jog
wheel button to conrm. The minutes will blink.
Turn the jog wheel to set the minutes and press the
jog wheel button to conrm.
Turning on the alarm
Toggle the alarm switch forward to turn on the alarm.
The symbol and the display will light up.symbol and the display will light up.
Note!
The display will time out after 10 seconds after
disconnecting the mains adapter. Press the alarm mains adapter. Press the alarm
switch to turn the display on again. The alarm time will
not show while the clock is searching for an RCC signal.
1.
2.
3.