English
15
Eco functionality
We have introduced the ECO FUNCTIONALITY label to help customers iden-
tify products within our assortment having a lower impact on the environ-
ment. Products carrying this label feature:
• Reduced power consumption in both operational and standby.
• Adaptive transmission power depending on range on base unit.
Troubleshooting
Check that the telephone cord is undamaged and properly plugged in. Dis-
connect any additional equipment, extension cords and other phones. If
the problem is resolved, the fault is with some other equipment.
Test the equipment on a known working line (e.g. at a neighbour’s house).
If the equipment works there the fault is probably with your telephone line.
Please report this to your network operator.
Phone does not work
• Check that the adapter/phone cord is connected correctly.
• Check the charge status of the handset batteries.
• Connect another, functioning, phone to the network wall socket.
No number shown when receiving calls
• This function requires a Caller ID subscription from your service
provider.
Not possible to make calls
• The batteries may be running low (charge the handset).
• The hand unit may be nearly out of range. Move closer to a base unit.
Phone continues to ring
• Some of the phone’s ring tones do not follow the line signal, which
means that the signal may continue for up to 8 seconds after answer-
ing a call. Try changing ring signal (melody).
If the phone still does not work, please contact the place of purchase for
service. Don’t forget the receipt or a copy of the invoice.
To Next Page
