Dorr Smart Light LCD 300 - Specifications

Einstellicht
Blitzbirne
DÖRR
Studio Flash Smart Light LCD 300 / 200
Instruction Manual
1. Specifications
Description of Flash Head
Thank you for purchasing a DÖRR Studio Flash. Please read the following instructions carefully before starting to operate the flash.
If you require additional information, please contact your local DÖRR representative or mail to export@doerrfoto.de.
9.
8.
7.
6.
5.
2.
3.
4.
1.
Modelling Light Bulb
Flash Bulb
1. On/Off Switch
2. Sync Socket
3. Power Socket
4. Fuse
5. Flash / Confirm Button (twist or press)
6. Flash Test Button
7. Mode Button
8. LC Display (see description below)
9. Photo Sensor
10. Flash Ready Indicator (green LED)
10.
Description of LC Display
a. Acoustic Flash Ready Signal
b. Triggering via Photo Sensor
c.
d. Modelling Light Mode Display
e.
f. Charging Status of Flash
g. Flash Counter (counts number of fired flashes)
h. Flash Power Control
i. Modelling Light Power Control
j. Selected Flash Mode - Triggering via Photo Sensor
a b
j
f
c
d e
h
g
i
Specifications Flash Head Smart Light LCD 300 Flash Head Smart Light LCD 200
Flash Power
300 Ws 200 Ws
Guide No.
52 42
Variable Power Range
Variably adjustable
from full ratio to 1/32
Variably adjustable
from full ratio to 1/32
Flash Recycling Time
3 3
Flash Duration
1/500 1/500
Modelling Light
50W 50W
Flash Triggering
Test button, photo sensor, sync cord
sync distance ≤ 10m
Test button, photo sensor, sync cord
sync distance ≤ 10m
Color Temperature
5600K 5600 K
Power Source
AC 200 - 240V / 50 Hz AC 200 - 240V / 50 Hz
Weight
1.8 kg 1.65 kg
Measurements
16 x 16 x 22cm 16 x 16 x 22cm
Supplied with
AC Adapter, Flash Bulb (inserted)
Modelling Light Bulb (inserted)
AC Adapter, Flash Bulb (inserted)
Modelling Light Bulb (inserted)
Fuse
6,3 Ah / 250V 6,3 Ah / 250V
www.doerrfoto.de
5
www.doerrfoto.de
RoHS