Dorumu PNS1010 - 4.1 System Setup

PNS1010 user’s manual
- 37 -
4.1 System Setup
4.1.1 Invoking setup
The setup function can only be invoked by pressing F2 when “Press <F2> to enter
Setup” message is prompted on the bottom of screen during POST.
During setup, all Fn function keys and power saving functions are disabled.
4.1.2Setup screens
4.1.2.1 Main Menu
Phoenix SecureCore(tm) Setup Utility
Main Advanced Security Boot Exit
Item specific Help
System Time
[12:00:00]
System Date
[01/01/2008]
Product Name:
XXXXXXX
Serial Number
XXXXXXX
Total Memory
XXX MB
BIOS Version:
VX.XX
UUID Number:
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select  Sub-Menu F10 Save and Exit
System Time and Date
The hour is displayed with 24 hours format. The values set in these two fields take effect
immediately.
Product Name, Serial Number and UUID Number
Display product name, serial number and UUID number.
Total Memory
This field reports the memory size of the extended memory with an integer in the system.
BIOS Version