[Continue]
The supervisor password is set complete after user press enter”
If verification fail:
[Continue]
If password on boot is required, the password must be set otherwise it cannot be
enabled.
The formats of the password are as follows:
Length No more than 8 characters.
Characters Alphanumeric keys only. The shift status i.e. Ctrl, Shift, Alt, and Capital are
ignored.
4.1.2.4 Boot Menu
Phoenix SecureCore(tm) Setup Utility
Main Advanced Security Boot Exit
HDD1/SSD1 Hark Disk Model name *1
CD/DVD CD/DVD Drive Model name
FDD
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select Sub-Menu F10 Save and Exit